Final Test and Reinstallation
After repair on a controller is completed, we conduct a
comprehensive final test and return the the controller with the test
report and a set of reinstallation instructions.
We have found in several cases that the cause of the failure of
the controller was associated with the control unit and/or the
motor. To prevent this from happening again, we have prepared
a set of reinstallation tests to help uncover any problems that
might exist.
These can be viewed below for the
FC350BJ/110V. Each
series of controllers has a slightly different version.
If you want to review these, a pdf file for the
Final Test Data can be seen by clicking
HERE
and a pdf file for the Reinstallation Tests
HERE
|
|
